Opening a PS5 controller can be useful for cleaning, repairing, or customizing it. However, it’s important to proceed with caution as this may void the warranty. Here’s a step-by-step guide to help you safely open your PS5 controller.
Tools Needed
- Flat-edged tool (like a plastic pry tool)
- Two-millimeter screwdriver
- Magnetic screwdriver (optional but helpful)
Steps to Open a PS5 Controller
- Remove the Faceplate:
- Use the flat-edged tool to create separation between the faceplate and the controller body. Start at one corner and gently work your way around.
- Once you’ve created enough separation, lift the faceplate off the controller.
- Remove the L1 and R1 Bumpers:
- Use the flat-edged tool to lift the L1 and R1 bumpers from the middle.
- These bumpers are held in place by clips, so they should come off easily.
- Remove the Screws:
- There are four screws holding the controller together – two on the top and two on the bottom.
- Use the two-millimeter screwdriver to remove these screws. A magnetic screwdriver can help prevent losing the screws.
- Create Separation:
- With the screws removed, create separation along the edges of the controller and near the microphone.
- Gently lift the back cover towards the triggers.
- Remove the Battery:
- Carefully lift the battery and disconnect the wire.
- There is usually one screw holding the battery cover, so remove it and lift the cover off.
- Disconnect Internal Components:
- Disconnect the wires connected to the motherboard.
- Remove the front cover by disconnecting four wires – two on the top and two on the sides.
- Remove Thumbsticks and USB Port:
- Pop off the thumbsticks and USB port.
- These components should come off easily once the internal connections are disconnected.
- Reassemble the Controller:
- To reassemble, follow the steps in reverse order.
- Make sure all components are securely connected before screwing the controller back together.
Tips for Opening a PS5 Controller
- Work on a Clean Surface: To avoid losing screws and small parts, work on a clean, flat surface.
- Be Gentle: Use gentle pressure to avoid damaging the internal components.
- Take Photos: Taking photos during disassembly can help you remember where everything goes during reassembly.
Conclusion
Opening a PS5 controller can be a straightforward process if you follow these steps carefully. Whether you’re cleaning, repairing, or customizing your controller, make sure to handle all components with care. If you’re not comfortable doing it yourself, consider seeking professional help to avoid any potential damage.